400 kg skid steer loader

In scenarios such as foundation excavation for rural self-built houses, municipal pipeline maintenance, warehouse cargo transfer, and site leveling in small factories, the 1.2-ton skid steer loader, with its core advantages of "strong power + flexible size", has become an efficient bridge connecting manual labor and large-scale equipment. This equipment not only retains the ability of small machinery to pass through narrow spaces but also possesses the operational intensity of medium-sized equipment. Through precise parameter design and multiple adaptation capabilities, it provides small and medium-sized construction teams with an integrated "one machine, multiple uses" solution.

Power System: Dual-Cylinder Strong Drive, Stable and Efficient

Power performance is the core guarantee for the continuous operation of the equipment. The 1.2-ton skid steer loader is equipped with a KOOP or Briggs & Stratton dual-cylinder engine. With a rated power of 14-17KW and a rotational speed of 3600 rpm, the power output is strong and stable. The 639cc displacement ensures that heavy-load operations do not weaken for 8 consecutive hours. Compared with single-cylinder models, the dual-cylinder design has less vibration, significantly improving operational comfort, especially suitable for fine operations requiring long-term holding of the joystick.

The natural aspiration method does not require additional supercharging devices, resulting in simple maintenance and low failure rates; the environmental protection design that meets Euro 5 emission standards can meet strict environmental protection requirements whether for construction in domestic urban areas or export to the EU market. The 10L fuel tank can support 6-7 hours of continuous operation, reducing downtime for refueling midway. Combined with an efficient combustion system, the fuel consumption per unit of operation is approximately 15% lower than that of single-cylinder equipment of the same level.

Operational Efficiency: Stable Lifting under Heavy Load, Precise Quantity Control

The rated load of 300kg and maximum load of 400kg perfectly match the material handling needs of small and medium-sized projects - a single load can hold 30 bags of cement (50kg each), 200 standard bricks, or 0.12 cubic meters of sand and gravel. Compared with 1-ton models, the single operation volume is increased by 25%, reducing the frequency of round-trip transportation. The maximum lifting force of 4.50KN ensures stable lifting even under heavy loads, and there will be no settlement or jamming even when shoveling high-density materials such as wet clay.

The precision of bucket operation is also excellent: a 27° tipping angle on the ground can clean up gravel close to the ground, and a 114° flipping angle at maximum height ensures thorough unloading without residue. The unloading height of 1510mm can directly connect to a 1.2-meter-high truck compartment, the 450mm unloading distance prevents materials from spilling onto the vehicle body, and the maximum unloading angle of 34° makes the dumping of viscous materials smoother. Combined with an adjustable travel speed of 0-6km/h, the entire process of loading, transferring, and unloading is smoothly connected, increasing the single-shift operation efficiency by more than 40%.

Flexible Passage: Smooth Travel in Narrow Areas, Adaptable to Multiple Scenarios

The overall vehicle width of 1100mm (with standard tires) and the total length of 1680mm without a bucket allow the equipment to easily pass through 1.2-meter-wide rural alleys, workshop passages, or construction fence gaps; the total length of 2206mm with a bucket ensures stability during operation, avoiding the common "tail lifting" problem of short-wheelbase equipment. The wheelbase of 850mm and ground clearance of 150mm enable smooth driving on uneven construction site roads, and the tail length of 280mm reduces the risk of collision during steering.

The 18×72 tires have strong grip, and the 720mm track width ensures no slipping in muddy areas while avoiding damage to rural hardened roads. The in-place steering function does not require additional turning space, allowing flexible direction adjustment in enclosed environments such as warehouses and corridors, completely solving the problem of large loaders being "unable to enter or turn", and realizing flexible operations of "reaching wherever needed".

Structure and Maintenance: Durable and Worry-Free, Cost-Controllable

The 1200kg overall weight is matched with a body frame made of high-strength steel. Key parts are made of thickened steel plates, and the deformation resistance is 30% higher than that of ordinary steel; the bucket edge is inlaid with wear-resistant alloy strips, extending the service life to more than 2000 hours, and it is not easy to curl when facing hard materials such as sand, gravel, and concrete blocks.

The maintenance design is highly user-friendly: the engine inspection door opens at an angle of 100°, making vulnerable parts such as filters and oil pipes clearly visible and easy to replace without professional tools; the working pressure of the hydraulic system is 17-21bar, which is in the industry's golden range, ensuring the speed of action response while reducing the risk of oil pipe aging; key bearings and hinge points are reserved with centralized lubrication interfaces, and weekly lubrication grease filling can ensure flexible operation. Ordinary technicians can independently complete maintenance, saving nearly 2000 yuan in maintenance costs every year.

Multiple Expansion: One Machine with Multiple Functions, Reducing Costs and Increasing Efficiency

The equipment supports quick replacement of multiple attachments: in addition to the standard bucket, it can be replaced with a log grapple for handling logs, a breaker for processing concrete blocks, a sweeper for cleaning workshop dust, etc. Through a unified hydraulic interface, the attachment can be replaced within 5 minutes. One machine can replace multiple tools such as loaders, forklifts, and small breakers, significantly reducing equipment procurement costs.

The maximum operating height of 2450mm and the bucket pin height of 1870mm expand the application scenarios of the equipment - it can not only lift materials during wall construction but also transfer maintenance materials for light roofs. Whether it is foundation excavation for rural house construction, trench cleaning for municipal pipe networks, or cargo stacking in warehouses, the 1.2-ton skid steer loader, with its "small but strong" performance, has become the core of efficient operations in small and medium-sized projects.